SMOK SCAR-18 Kit

The 230W SMOK SCAR-18 Kit is the pinnacle of SMOK innovation, featuring the efficient and ultra stable IQ-X chipset, IP67 water and dust resistance and dual 18650 battery (batteries sold separately) compatibility. Included in the kit is the 6.5ml TFV9 sub-ohm tank with two V9 Meshed coils designed for dense clouds and amazing flavor.

With an all-new body design, the SMOK SCAR-18 mod provides enhanced ergonomics and functionality. It features a side-positioned USB port so your device can be charged upright, conveniently large buttons for firing and adjustment, and a 0.96” TFT display to show all your vaping data in clear color. The device is smaller than competing dual 18650 batteries and the frame is made with leather and zinc alloy for a comfortable feel when you hold the device and extraordinary drop resistance.

The SCAR-18 is IP67 water resistant and can withstand immersion up to 1 meter for up to 30 minutes without damage to the chip. It’s also IP67 dustproof and shockproof, so you can bring it confidently with you even in less than ideal conditions.

Built into the SMOK SCAR-18 is the intelligent IQ-X chipset which provides four vape modes and a suite of protections. Your SCAR-18 supports precise temperature regulation in three modes for nickel, titanium and stainless steel coils, and you’ll be able to find your perfect vape using the TCR mode to customize your coil heating. If you’re using standard Kanthal / FeCrAl coils, you’ll find a delicious vape using POWER mode, where you can adjust your wattage all the way up to 230W.

Included in your SMOK SCAR-18 Kit is the 6.5ml TFV9 Tank optimized for high-wattage, sub-ohm vaping. This tank features a child-resistant top cap for added security as well as leak resistance and a gold-plated 510 connection which helps resist damage and increase conductivity for a long lifetime.

You can adjust the direct airflow system in your TFV9 tank by twisting the bottom dual airflow control ring, increasing the amount of air for large vapor clouds or decreasing your airflow for more concentrated flavor.

To open and refill your TFV9 Tank, you’ll want to lift the top cap and rotate to open. Then fill through the large port (not through the center hole), and rotate and press down to re-seal your tank.

The SMOK SCAR-18 Kit has two 0.15 ohm SMOK TFV9 Coils included. These are optimized for vapor production and made with a kanthal mesh heating element for a faster heating time and more flavor per puff. Use your 0.15 ohm V9 Meshed coils between 40W and 90W and with the POWER mode on your SCAR-18 mod.

High nicotine e-liquids (juices over 10mg/ml or 1% nicotine strength) should not be used in the SMOK SCAR-18 Kit.

SMOK SCAR-18 Kit Includes:

(1) SMOK SCAR-18 Mod

(1) SMOK TFV9 Tank (6.5ml)

(2) 0.15 ohm TFV9 Coils

(1) Glass Tube Replacement

(1) USB Cable

User Manual

SMOK SCAR-18 Kit Features:

- IQ-X Chipset

- 230W Max Power

- Dual 18650 Compatibility (Batteries Sold Separately)

- IP67 Water Resistant

- IP67 Dustproof

- Shockproof

- TCR Capable

- Intelligent Atomizer Recognition

- Puff Monitoring System

- 8 Second Cutoff

- Short Circuit Protection

- Overheating Protection

- Low Battery Warning

- Childproof Tank Top Cap

- Top Refill Design

- Gold-Plated 510 Threading On Tank

- 6.5ml Eliquid Capacity

SMOK SCAR-18 Kit Specifications:

SCAR-18 Mod

Size: 54mm x 30.6mm x 88mm

Weight: 183.5g

Output Wattage: 1W - 230W

Standby Current: <300uA

Input Voltage: 6.4V - 8.4V

Output Voltage: 0.5V - 8.0V

Charging Voltage: 5V

Charging Current: Max 1.3A

Resistance Range: 0.1 ohm - 2.5 ohm (VW), 0.05 ohm - 2.00 ohm (TC)

Temperature Range: 200 degrees Fahrenheit - 600 degrees Fahrenheit / 100 degrees Celsius to 315 degrees Celsius

TFV9 Tank

Material: Stainless Steel

Size: 28mm x 56mm

Weight: 62g

Capacity: 6.5ml

Threading: 510

Compatible Coil: SMOK TFV9 Coils