• Ex Tax:$17.99
  • Product Code: M00000180
  • Available: In Stock
The RPM 2 Kit from SMOKTech is an upgraded 80W pod system designed to satisfy any vaper. With a built-in 2000m..

Available Options

The RPM 2 Kit from SMOKTech is an upgraded 80W pod system designed to satisfy any vaper. With a built-in 2000mAh battery, max adjustable power of 80 watts, coils made for direct to lung (DTL) or mouth to lung (MTL) vapers, and a 7ml eliquid capacity, the RPM2 is the compact vape built to work for you, no matter how you like to vape.


The updated body of the RPM2 Kit is more compact and features larger buttons than its predecessors for enhanced ergonomics and easier use. The large 1.14” TFT display shows all your vaping data in crisp color, including wattage, battery level, coil resistance, output voltage, and puff time and counters.


You can press the fire key and + button simultaneously to display detailed information about remaining battery life, including an estimated remaining puff count. The remaining puff count is based on an average pod resistance of 0.2 ohm and wattage of 60W, so you may get more or fewer puffs depending on your settings!


Built into the RPM 2 is a 2000mAh capacity battery to provide extended vape time over many smaller pod kits. The RPM 2 also has multiple battery protections, including over-charge, overdischarge, overcurrent and short-circuit protections.


The RPM 2 also has an updated USB Type-C charging port for added stability and security as well as faster charging time. Using an appropriate charger (max charging current 1.4A) you’ll find the RPM 2 charges much quicker than comparable micro-USB compatible devices.


What pods work with the RPM 2?


Included in your RPM Kit you’ll find two types of RPM 2 Pods. Both types of pod have a 7ml eliquid capacity, magnetic pod connection for ultra-secure connecting to your device, and an ergonomic mouthpiece with a large opening for excellent airflow. RPM 2 pods also have a transparent viewing window so you can clearly see when it’s time to refill your eliquid.


To refill your pod, just remove it from your device and unseal the rubber side-fill port. Fill with e-liquid through the slot and then press the plug back in carefully and firmly to re-seal your pod. If it is the first fill, be sure to let your pod and coil sit for about 5 minutes to let the coil absorb your eliquid.


The RPM 2 has an upgraded form factor over other SMOK devices, so you should only use RPM 2 Pods with your RPM 2 device; other pods will not fit. The two types of RPM 2 Pod are the RPM 2 RPM 2 Pod and the RPM 2 RPM Pod. Each pod takes a different series of SMOK coil, so it’s important to match your coils and your pods.


What coils should I use with my RPM 2?


Because the RPM 2 Kit has two different pods, there are two different types of coils that will work with your RPM 2.


Using the RPM 2 RPM 2 Pod, you’ll want to use SMOK RPM 2 Coils designed exclusively for the RPM 2. Pre-installed in your included RPM 2 Pod is a 0.16 ohm RPM 2 Mesh Coil best used between 25W and 50W. This coil is optimized for direct lung vaping and will provide dense and flavorful vapor.


The RPM 2 RPM Pod also included in your kit is compatible with SMOK RPM Coils. You can install any authentic SMOK RPM series coil in this pod. It comes pre-installed with a 0.4 ohm RPM Mesh coil recommended for use at 25W.


What eliquids can I use with my RPM 2 Kit?


The RPM and RPM 2 coils are designed to work best with e-liquids that have a 70% VG thickness.


The RPM 2 can be used with low-nicotine (under 10mg/1%) eliquids at your preferred wattage, up to the maximum 80W.


If you use high-nicotine salt formulations, you should not use sub-ohm coils (coils with a resistance lower than 1.0 ohms) or wattage settings higher than 15W with your RPM 2 Kit.


SMOK RPM 2 Includes:


(1) SMOK RPM 2

(1) RPM 2 RPM 2 Pod

(1) 0.16 ohm RPM 2 Mesh Coil (Pre-Installed in the RPM 2 Pod)

(1) RPM 2 RPM Pod 

(1) 0.4 ohm RPM Mesh Coil (Pre-Installed in the RPM Pod)

(1) USB Cable

User Manual


SMOK RPM 2 Features:


- 80W Max Power

- 2000mAh Built-In Battery

- Mesh Coil Compatibility

- DTL and MTL Coils Available

- 7ml Eliquid Capacity

- Side-Fill Pod

- Ergonomic Mouthpiece

- Juice Level Window

- “Puffs Remaining” Display

- 0.001s Firing Speed

- USB-C Charging

- Large Power & Adjustment Buttons

- 1.14” TFT Display

- Magnetic Pod Connection

- Intelligent Atomizer Recognition

- 8-Second Cutoff

- Over Charge Protection

- Over Discharge Protection

- Overcurrent Protection

- Short Circuit Protection

SMOK RPM 2 Specifications:

Dimensions: 28.5mm x 31mm x 108.5mm

Weight: 132g

Battery Capacity: 2000mAh Built-In

Output Wattage: 1W - 80W

Output Voltage: 0.5V - 4.0V

Resistance Range: 0.15 ohm - 3.0 ohm

Charging Voltage: 5V +/- 0.2V

Charging Current: 1.4A Max

Compatible Coils: RPM Coils, RPM 2 Mesh Coils


Write a review

Note: HTML is not translated!
    Bad           Good